Raw materials

Mixed wood pellets

Waste from pallet, furniture and packaging production, often with bark and varying moisture.

We grind and dry mixed wood to one moisture level, otherwise the pellets fall apart during packaging. Waste from boards and glued timber must be checked before selecting the die, which is why we ask for a sample.

What you need to know

Grinding

needed, hammer mill before the granulator

Typical moisture

varies, we measure it before selecting the line

Die

selected after testing a sample

Talk to us about your line Book a raw material test

A pellet line for this raw material

Two lines to start from, and below them the production stages: which ones this raw material needs and which machines do the job.

up to 1 t/h

Lines up to 1 tonne per hour

See lines up to 1 t/h

from 1 t/h

Lines from 1 tonne per hour

See lines from 1 t/h

1. Feed hopper needed

   Takes in the raw material and feeds it evenly into the line.

   Feed hoppers with a screw discharger (V-shaped walls), Feed hoppers with a slat scraper (vertical walls)

2. Grinding needed

   The material has to be ground to sawdust size before it reaches the pellet mill.

   Hammer mills

3. Drying it depends

   A dryer only above 15% moisture. We measure it on a sample.

4. Pelleting needed

   The heart of the line. For this material: selected after testing a sample.

   Granulators

5. Cooling it depends

   Needed from about 200 to 250 kg/h. It can be skipped with big bags, not with small bags.

   Coolers

6. Screening needed

   A drum or vibrating screen separates dust from the finished pellets.

   Drum screens, Vibrating screens

7. Packing your choice

   15 kg bags, big bags or bulk, depending on the buyer.

   Packaging systems

8. Transport between stages needed

   Belt and screw conveyors connect the machines into one line.

   Belt conveyors, Screw feeders, Redlers

9. Control cabinet needed

   Controls the whole line, also remotely from a phone.

   Industrial automation

Other raw materials